top of page

Features

Scale 1:5
1. 36cc single cylinder air-cooled two stroke four point fixed gasoline engine (walbro1107 carburetor, NGK spark plug)
2. Size: 840x450x290mm
3. Track width: 390mm
4. Wheelbase: 560mm
5. Transmission mode: 4WD shaft transmission
6. Braking method: central disc brake
7. CNC integrated aluminum alloy chassis
8. Front and rear CNC shock absorber support plates (red, orange, and green)
9. 8mm metal shock absorber (red, orange, green)
10. CNC metal clutch bracket kit
11. Front and rear CNC casing differential
12. Small nail off-road tire (170 * 60) (high-strength nylon white border)
13. CNC metal tire fixing nut (red, orange, green)
14. Dual steering structure with CNC universal infinitely adjustable steering arm (red, orange, green)
15. 18kg digital metal gear throttle servo
16. 75kg semi aluminum frame metal gear steering servo * 2
17. New BER-TRC4 LCD display remote control
18. SC 6V 4500mAh nickel hydrogen battery
19. New 5S Off road Tail Wing
20. Second generation dominator exhaust pipe
21. PC material car shell
22. Injection molded transparent welding oil pot to prevent oil leakage
23. 8000 RPM clutch
24. Emergency repair kit is included with the vehicle
25. New proportioning pot
 

4WD Rovan 5B 5S 36CC 1/5 Scale 2 Stroke Gasoline Buggy Orange

SKU: 5S-ORG-00-36-B-4
$1,069.00Price
Excluding Sales Tax
Quantity
Out of Stock
    • Starting Instructions:

      Ensure the car and radio are powered on and responding.

      Set the choke on the right side of the car (red lever on the carburetor) to the vertical closed position.

      Press the primer bulb on top of the carburetor 3 to 4 times, or once fuel is visible.

      Gently pull the starter rope until it engages, then pull swiftly. Do not pull the rope out completely; use short quick pulls.

      Crank until the engine fires (usually 1 to 3 pulls).

      Turn off the choke, then pull the rope 1 or 2 times to start the engine.

      Break-In Process:

      Initial Run: Start by running the car at idle to 1/4 throttle or less for about 5 minutes. Let the engine cool down completely after this run.

      Second Run: Repeat the same process less for 10 minutes, then allow it to cool down.

      Third Run: You can start pushing it a little harder, but keep in mind that a new engine generates more heat due to increased friction. Run for 8 to 10 minutes, then let it cool.

      Subsequent Runs: Continue the process for about five runs, being mindful of any debris that could block cooling. A clean engine runs cooler.

      Final Break-In: After these runs, you can run the car at full throttle and let it burn through an entire tank of fuel.

      Post-Break-In: Be sure to check and snug up the exhaust pipe after the initial break-in process.

      Before each run check bolts throughout the car to ensure they are tight. Lock-tight is recommended on clutch and brake assembly bolts. clean bolts and holes with alcohol and a q-tip to ensure lock-tight adhesion.

       
    • You will be tempted to upgrade some of the parts to aluminum. But let me tell you, aluminum is unforgiving, breaks and destroys everything behind it. The High Strength ABS Plastic will give and bounce back without damage. Many plastic components are way better.  
    • Disclaimer and Safety Notice:

      All items offered by 5TRC are Brand New. 99.9% of our customers experience no issues with the products. However, if you are new to the hobby, we strongly encourage you to watch our instructional videos, available through YouTube. Rofun and Rovan products sold by 5TRC through eBay, are sold without warranty, express or implied. Due to the nature of the hobby, these vehicles are typically customized and modified by enthusiasts. Accordingly, all products are sold without guarantees of any kind. However your purchase may be covered by ebay money back gurantee. Please be aware that these items can cause severe burns from the exhaust if handled improperly. Improper use can also result in serious injury or death caused by impact to the operator, bystanders, or pets in the area of operation. By purchasing this product, you agree to hold harmless 5TRC from any and all liability for accidents, injuries, or damages that may result from the use or misuse of this product.

Capture.PNG

5TRC.com

130 Muntz Street

Hillsboro, Ohio 45133

419-773-6512

email address_edited.jpg
YouTube-Subscribe-PNG-Isolated-Image.png

Tag A Friend

bottom of page